How to Install Temporary Concrete Barriers to Protect Your Workplace
Posted on: 14 December 2019
If you are responsible for maintaining the road network inside a private development, then you may be getting ready to embark on a significant improvement project alongside one of the busiest streets. You'll want to cause as little disruption as possible to everyone concerned but will also want to make sure that your workers are as safe as possible while the work is ongoing. What is the best way to ensure their protection while allowing traffic to proceed without too much chaos?
Temporary Barriers
While you would like this project to go ahead without any disruption to traffic whatsoever, this will likely be impossible as some of the work will probably spill over into one lane of that busy street. In this case, you will need to have a layer of protection between the work area and the traffic flow, and the best way to do this is by installing some temporary concrete barriers. These barriers come in individual pieces that are tailor-made for this kind of project, so they provide a clear delineation between the workers and any moving vehicles.
High-Strength Concrete
Temporary barriers like this are in widespread use in the civil engineering world because they are perfect for containing traffic at relatively high speeds or providing security protection in other areas. They are cast from high-strength concrete, complete with steel reinforcement, and they are perfectly capable of withstanding an impact from a very large vehicle.
Introducing the Barriers
Furthermore, they can be bolted together using high tensile bolts or can be mounted to the surface of the road, using specially installed plates and relevant attachments. Either way, once they are introduced, they can only be removed by a crane and will certainly provide the level of protection that you are looking for.
Determining Your Need
If you want to install these concrete barrier walls, you should take the appropriate measurements to determine how many individual units you will need. For example, you may just want to install a barrier in between the traffic and the work area or may want to install a secondary barrier in between two lanes of traffic as well. This should help to keep the speed down and to focus the attention of each driver on the road ahead. Don't underestimate the risk of distraction in a busy work area, and in this case, you will want to avoid the risk of any collision, no matter how it is caused.
Ready for Installation
Once you have determined how many of these barriers you need, get in touch with a concrete contractor to order them. You will then need to get the appropriate transportation and crane in place so that they can be offloaded and installed efficiently.
To learn more about concrete barrier walls, contact a concrete contractor in your area.
Share